• +91-9872088885
  • info.ruvicpower@gmail.com

Solar Mounting Structures

Leading Solar Mounting Structure Services

PV modules installed to generate electricity from sunlight are supported by solar mounting structures. These structures position the solar panels at an angle that allows them to collect the most solar radiation.

Because many people believe that solar is the way of the future, they are looking for more efficient and cost-effective solar gadgets to get the most out of the technology. The mounting structure is one of the most important areas of innovation in this field.

Solar mounting structures are one of the most important components of a solar system since they help to increase the energy produced. This is because solar panels, which generate electricity, work best when the sunlight they absorb is unhindered and active for long periods of time. The panels should be tilted at a key angle for this.

Because there are so many various types of solar mounting structures on the market, it's well worth your time to spend 10 minutes reading through all of the material and selecting the best one that matches all of your needs.

Ruvic Power is one of the best Solar Companies in India and one of its products is solar mounting panels.

Mounting as a Shade Structure-

Solar panels can also be used to create shade structures, which can be used in place of patio covers. Such shading solutions are often more expensive than ordinary patio covers, especially when the panels provide all of the desired shade. Because the weight of a common PV array is between 3 and 5 pounds/ft2, the shading systems can be supported by ordinary systems. The support systems may need to be strengthened if the panels are mounted at a steeper angle than normal patio covers. Other issues are-

  • Maintenance access to the array has been simplified.
  • To maintain the shading structure's aesthetics, module wiring can be concealed.
  • Vines should not be grown around the structure since they may come into contact with the wiring.
Roof Mounting-

A PV system's solar array can be mounted on rooftops with a few inches of space between panels and parallel to the roof's surface. The array is mounted with each panel aligned at an angle if the rooftop is horizontal. If the panels are to be installed before the roof is built, the roof can be built to facilitate this by attaching support brackets for the panels before the roof materials are put in. The solar panels can be installed by the same group that is responsible for the roof installation. It's relatively simple to retrofit panels directly on top of existing roofing structures if the roof has previously been built.

Installing solar panels on a small minority of roofs (often not built to code) that are designed to bear only the weight of the roof necessitates strengthening the roof structure prior to the installation.


Large, utility-scale solar power plants account for the majority of ground-mounted PV systems. Racks or frames attached to ground-based mounting supports in the PV array hold solar modules in place.

The following are examples of ground-based mounting supports:
Pole mounts are stakes that are pushed into the ground or implanted in concrete. Concrete slabs or poured footings are examples of foundation mounts. Ballasted footing mounts, such as concrete or steel bases, do not require ground penetration and rely on weight to secure the solar module system in place. This mounting system is ideal for locations where excavation is not possible, such as capped landfills, and it makes decommissioning and relocation of solar module systems much easier.

The benefits of a Solar Mounting Structure from one of the best Indian Solar companies include-
  • Reduced Energy Bills
  • Clean and Renewable Energy
  • Low Maintenance
  • Used for generating heat and electricity.